S‐Adenosyl Methionine Cofactor Modifications Enhance the Biocatalytic Repertoire of Small Molecule C‐Alkylation

A tandem enzymatic strategy to enhance the scope of C‐alkylation of small molecules via the in situ formation of S‐adenosyl methionine (SAM) cofactor analogues is described. A solvent‐exposed channel present in the SAM‐forming enzyme SalL tolerates 5′‐chloro‐5′‐deoxyadenosine (ClDA) analogues modified at the 2‐position of the adenine nucleobase. Coupling SalL‐catalyzed cofactor production with C‐(m)ethyl transfer to coumarin substrates catalyzed by the methyltransferase (MTase) NovO forms C‐(m)ethylated coumarins in superior yield and greater substrate scope relative to that obtained using cofactors lacking nucleobase modifications. Establishing the molecular determinants that influence C‐alkylation provides the basis to develop a late‐stage enzymatic platform for the preparation of high value small molecules.     

Structural studies and biological evaluation of Co (II), Ni (II) and Cu (II) complexes of carbohydrazone derived from ethyl acetoacetate in addition to crystallographic description of La (III) or Sm (III) catalytic activity abnormal product

New carbohydrazone ligand derived from the condensation of carbohydrazide and ethyl acetoacetate, diethyl 3,3′‐(carbonylbis (hydrazin‐2‐yl‐1‐ylidene))(3E,3′E)‐dibutyrate (H₄EBC), and its divalent Co, Ni and Cu chelates have been isolated and characterized utilizing convenient methods. ¹H‐NMR spectrum of H₄EBC revealed the abundance of the enol isomer in solution, which was the opposite to what was shown by the solid IR. This was supported by comparing the theoretical IR of both keto and enol forms. In [Ni(H₄EBC)Cl₂(H₂O)]·2H₂O, H₄EBC acts as a neutral NON tridentate ligand via the (C=O)_carbonyl oxygen atom besides the two (C=N)_azomethine nitrogen atoms, while in [Co(H₄EBC)Cl₂(2H₂O)]·2H₂O, H₄EBC behaves as a neutral NN bidentate ligand through the two azomethine groups. Magnetic measurements inherent to their electronic spectra show that both Ni (II) and Co (II) chelates have octahedron coordination frameworks. On the other hand, the ligand behaves as a binegative tetradentate in [Cu₂(H₄EBC)Cl₂]·H₂O via the deprotonated (C=O)_carbonyl groups of the ethyl acetoacetate framework and the two (C=N)_azomethine groups. In the latter complex, the carbonyl group of the carbohydrazide moiety is converted to hydroxyl group. Cu (II) complex has a tetrahedral geometry according to ESR and electronic spectral data. The reaction of H₄EBC with SmCl₃·6H₂O or LnCl₃·7H₂O gave single crystals of abnormal product (C₁₆H₁₆N₄O₄). The packing diagram of this crystal has a chain structure. The photoluminescence spectra of [Cu ₂ (H ₄ EBC)Cl ₂ ]·H ₂ O , [Co(H ₄ EBC)Cl ₂ (H ₂ O) ₂ ]·2H ₂ O and [Ni(H ₄ EBC)Cl ₂ (H ₂ O)]·2H ₂ O display emission broad‐bands at 342, 321 and 337 nm, respectively. The microbial behavior of the synthesized moieties was investigated against various bacterial and fungal strains. [Cu₂(H₄EBC)Cl₂]·H₂O complex shows the same activity as ampicillin towards Escherichia coli and Staphylococcus aureus with inhibition zones of 26 and 22 mm, respectively. Antioxidant activity is determined using bleomycin‐dependent DNA damage assay besides erythrocyte hemolysis. Finally, in vitro cytotoxic activities against two different cell lines have been examined.     

Comparative study between two fabricated potentiometric sensors to enhance selectivity towards ferrous ions

Electroanalytical methods are highly selective for measuring electrical quantities including the charge, potential and current with their relation to chemical parameters. They are widely applied in various fields such as biochemical analysis, industrial quality control and environmental monitoring. They have many advantages over other techniques in that they are not time consuming and are specific for certain oxidation states of certain elements which give these techniques high selectivity and sensitivity features. This paper is based on two parts: the first part describes the fabrication of screen‐printed electrodes (SPEs) modified with methyl red as electroactive material, while second part describes the preparation and characterization of Fe(II)–methyl red complex using various spectroscopic tools, the complex being used for the construction of carbon paste electrodes (CPEs). The two proposed electrodes were successfully applied for the determination of Fe(II) in water and pharmaceutical (pharovit) samples. The electrodes under investigation show potentiometric response for Fe(II) in the concentration range 8.0 × 10^?7–1.0 × 10^?2 and 5.0 × 10^?7–1.0 × 10^?2 M at 25°C for SPE and CPE, respectively, and the electrode response is independent of pH in the range 1.5–7.0. These sensors show Nernstian slopes of 29.1 ± 0.2 and 29.7 ± 0.16 mV decade^?1 with detection limit values of 8.0 × 10^?7 and 5.0 × 10^?7 M for SPE and CPE, respectively. These electrodes show fast response time of 6 and 4 s and exhibit a lifetime of 100 and 30 days for SPE and CPE, respectively. The mechanism of chemical reaction between modifier and Fe(II) on the SPE surface was studied using infrared spectra, scanning electron microscopy and energy‐dispersive X‐ray analysis. The proposed potentiometric method was validated according to the IUPAC recommendations. The results obtained using the proposed sensors were comparable with those obtained with inductively coupled plasma analysis.     

Design and Synthesis of Aromatic Polyesters Bearing Pendant Clickable Maleimide Groups

A bisphenol bearing pendant maleimide group, namely, N‐maleimidoethyl‐3, 3‐bis(4‐hydroxyphenyl)‐1‐isobenzopyrrolidone (PPH‐MA) was synthesized starting from phenolphthalein. Aromatic (co)polyesters bearing pendant maleimide groups were synthesized from PPH‐MA and aromatic diacid chlorides, namely, isophthaloyl chloride (IPC), terephthaloyl chloride (TPC), and 50:50 mol % mixture of IPC and TPC by low temperature solution polycondensation technique. Copolyesters were also synthesized by polycondensation of different molar proportions of PPH‐MA and bisphenol A with IPC. Inherent viscosities and number‐average molecular weights of aromatic (co)polyesters were in the range of 0.52–0.97 dL/g and 20,200–32,800 g/mol, respectively indicating formation of medium to reasonably high‐molecular‐weight polymers. ¹³C NMR spectral analysis of copolyesters revealed the formation of random copolymers. The 10% weight loss temperature of (co)polyesters was found in the range 470–484 °C, indicating their good thermal stability. A selected aromatic polyester bearing pendant maleimide groups was chemically modified via thiol‐maleimide Michael addition reaction with two representative thiol compounds, namely, 4‐chlorothiophenol and 1‐adamantanethiol to yield post‐modified polymers in a quantitative manner. Additionally, it was demonstrated that polyester containing pendant maleimide groups could be used to form insoluble crosslinked gel in the presence of a multifunctional thiol crosslinker. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 630–640     

Strong red emissions induced by Pt–Pt interactions in binuclear cycloplatinated(II) complexes containing bridging diphosphines

A series of dinuclear cycloplatinated(II) complexes with general closed formula of [Pt₂Me₂(C^N)₂(μ‐P^P)] (C^N = 2‐vinylpyridine (Vpy), 2,2′‐bipyridine N‐oxide (O‐bpy), 2‐(2,4‐difluorophenyl)pyridine (dfppy); P^P = 1,1‐bis(diphenylphosphino)methane (dppm), N,N‐bis(diphenylphosphino)amine (dppa)) are reported. The complexes were characterized by means of NMR spectroscopy. Due to the presence of dppm and dppa with short backbones as bridging ligands, two platinum centres are located in front of each other in these complexes so a Pt…Pt interaction is established. Because of this Pt…Pt interaction, the complexes have bright orange colour under ambient light and are able to strongly emit red light under UV light exposure. These strong red emissions originate from a ³MMLCT (metal–metal‐to‐ligand charge transfer) electronic transition. In most of these complexes, the emissions have unstructured bell‐shaped bands, confirming the presence of large amount of ³MMLCT character in the emissive state. Only the complexes bearing dfppy and dppa ligands reveal dual luminescence: a high‐energy structured emission originating from ³ILCT/³MLCT (intra‐ligand charge transfer/metal‐to‐ligand charge transfer) and an unstructured low‐energy band associated with ³MMLCT. In order to describe the nature of the electronic transitions, density functional theory calculations were performed for all the complexes.     

Plasma Based Synthesis of Nanomaterials for Development of Plasmon Enhanced Infrared Responsive Optoelectronic Device

Plasma Chemistry and Plasma Processing - We report plasma based fabrication of an optoelectronic device with plasmon enhanced infrared sensitivity realized by integrating plasmonic gold...     

Total Synthesis of Lajollamycin B

The first total synthesis of lajollamycin B, a structurally novel nitro-tetraene spiro-β-lactone/γ-lactone antibiotic, is described. The convergent synthesis involves the construction of the C8′–C11′ nitrodienylstannane and its coupling with the segment prepared from the C1′–C7′ ω-iodoheptadienoic acid and the right-hand heterocyclic fragment, which has been utilized for our previous syntheses of oxazolomycin A. The revision of the geometry of the terminal Δ^{10′, 11′}-double bond from E to Z is also described for the structure of natural lajollamycin B.     

Enhancing the Viscosity-Sensitive Range of a BODIPY Molecular Rotor by Two Orders of Magnitude

Molecular rotors are a class of fluorophores that enable convenient imaging of viscosity inside microscopic samples such as lipid vesicles or live cells. Currently, rotor compounds containing a boron-dipyrromethene (BODIPY) group are among the most promising viscosity probes. In this work, it is reported that by adding heavy-electron-withdrawing −NO₂ groups, the viscosity-sensitive range of a BODIPY probe is drastically expanded from 5–1500 cP to 0.5–50 000 cP. The improved range makes it, to our knowledge, the first hydrophobic molecular rotor applicable not only at moderate viscosities but also for viscosity measurements in highly viscous samples. Furthermore, the photophysical mechanism of the BODIPY molecular rotors under study has been determined by performing quantum chemical calculations and transient absorption experiments. This mechanism demonstrates how BODIPY molecular rotors work in general, why the −NO₂ group causes such an improvement, and why BODIPY molecular rotors suffer from undesirable sensitivity to temperature. Overall, besides reporting a viscosity probe with remarkable properties, the results obtained expand the general understanding of molecular rotors and show a way to use the knowledge of their molecular action mechanism for augmenting their viscosity-sensing properties.     

Alkali Blues: Blue-Emissive Alkali Metal Pyrrolates

2-Iminopyrroles [H^tBuL, 4-tert-butyl phenyl(pyrrol-2-ylmethylene)amine] are non-fluorescent π systems. However, they display blue fluorescence after deprotonation with alkali metal bases in the solid state and in solution at room temperature. In the solid state, the alkali metal 2-imino pyrrolates, M(^tBuL), aggregate to dimers, [M(^tBuL)(NCR)]₂ (M=Li, R=CH₃, CH(CH₃)CNH₂), or polymers, [M(^tBuL)]_n (M=Na, K). In solution (solv=CH₃CN, DMSO, THF, and toluene), solvated, uncharged monomeric species M(^tBuL)(solv)_m with N,N′-chelated alkali metal ions are present. Due to the electron-rich pyrrolate and the electron-poor arylimino moiety, the M(^tBuL) chromophore possesses a low-energy intraligand charge-transfer (ILCT) excited state. The chelated alkali cations rigidify the chromophore, restricting intramolecular motions (RIM) by the chelation-enhanced fluorescence (CHEF) effect in solution and, consequently, switch-on a blue fluorescence emission.     

Exploration of Nano-Saturns: A Spectacular Sphere–Ring Supramolecular System

Saturn-like systems consisting of nanoscale rings and spheres are fascinating motifs in supramolecular chemistry. Several ring molecules are known to include spherical molecules at the center of the cavity via noncovalent attractive interactions. In this Minireview, we generalize the molecular design, the structural features, and the supramolecular chemistry of such “nano-Saturns”, which consist of monocyclic rings and fullerene spheres (mainly C₆₀), on the basis of previous experimental and theoretical studies. Ring molecules are classified into three types (loop, belt, and disk) according to their shapes and possible interactions. Whereas typical belt-shaped rings tend to form tight complexes due to the wide contact area via π–π interactions, flat disk-shaped rings generally form weak complexes due to the narrow contact area mainly via CH–π interactions. In spite of the small association energies, disk-shaped rings are attractive because such rings can mimic the planet Saturn precisely as exemplified by an anthracene cyclic hexamer–C₆₀ complex.